Storm Chaser Splitboard

The backcountry surf slasher

Ideal for surfing frozen waves and snorkel deep days

Surf Series

Shape

Traction Tech

Progressive Sidecut

Quick Tension Tail Clip

Directional Shape

Bolt-less Bridge

Flex

Stiffness: 7/10 - Playful

Directional flex pattern

IMG/png/jones1920-stormchasersplit-topsheet.png

IMG/png/jones1920-stormchasersplit-nose.png

The Surfy Speed Racer

The Storm Chaser Split unlocks access to those remote frozen swells and packs insane float into a short, but still high volume splitboard. The ultra-wide waist width maximizes the float of the shortened running length and the Surf Rocker profile pops the nose even further out of the snow when you step on the gas. The Storm Chaser’s short sidecut will have you ripping tight tree runs like a GS course on even the deepest days. The unique shape is matched with Inner/Outer Traction Tech 1.0 edges for enhanced grip on icy skintracks or firm descents and Boltless Bridge and Karakoram Ultra Clips for unmatched torsional board connection in ride mode. New for 2020, we’ve added Rounded Recycled ABS Sidewalls for improved topsheet durability.

Personality

Christenson Surf Rocker Profile

Custom tip/tail rocker profile designed by surf shaper Chris Christenson for the Mind Expander, Mountain Surfer and Storm Chaser. The nose rocker starts just inside of the front inserts and the tail rocker starts just at the back inserts. When you weight the tail of the board the nose ramps up out of the snow for insane float on the deepest days. These subtle rocker contours match a Christenson surfboard rocker profile.

Traction Tech

Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.

Traction Tech is a critical feature for rockered boards. Rocker improves glide in mixed conditions, but the decreased edge contact makes it harder to really lock
into your turns and hold a solid edge. Traction Tech is crucial to offset the edge drift of rocker. — Jeremy Jones

Progressive Sidecut

At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Quick Tension Tail Clip

Built-in climbing skin tension system using pre-cut notch that eliminates the need for a traditional skin tail clip.

Flip Flop Base

Producing two or more base color options minimizes p-tex waste. Order may be filled with either color. Color does not vary by size.

Sintered 9900

Made from Ultra-High Molecular Weight Polyethylene (UHMW-PE) and Carbon. This ultra-fast base is easy to repair thanks to the UHMW-PE.

Wend Natural Wax

Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Biax Fiberglass

A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

Factory Tuned

All Jones Snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Oversized Recycled Edges

All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

Karakoram Ultra Clip

ULTRA clips are the strongest, lowest profile splitboard clips in the world. They deliver unmatched compression between board halves and they are adjustable so you can maintain even compression as your splitboard ages.

Stainless Steel Reinforcement

Stainless steel plates are embedded into the nose and tail for improved board tip durability.

The Bridge Tech

The Bolt-less Bridge eliminates split clip attachment hardware from the base of the board by re-profiling the wood core at the clips. The wood core under the clips is thicker providing better torsional stifness and a more powerful connection at the split clips.

Recycled Rounded ABS

New rounded sidewall finish that improves board durability by protecting top sheet from chipping. Available on all splitboards and Surf Series models.

Eco Plastic Topsheet

Bio-plastic topsheet made from Castor beans. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet)

Super Sap Bio Resin

All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

Control Split Core

Dual-density full premium wood core designed specifically for split boards 2:1 paulownia to poplar stringer ratio keeps core light yet ultra damp.

Gear 101
Not all board shapes are designed to be ridden the same size. The Surf Series models live by their own sizing rules.
Choose the ideal size Surf Series board using your weight and boot size (see the size chart below).

If you wear US Men’s 11.5 or bigger, look for our Big Horn series boards with minimum waist width 26.3 cm.
Not sure your ideal snowboard size? Check out our sizing guidelines for each model.

Know your board
The dimensions of a snowboard define how that board performs on snow. The dimension specs of all our models are fine tuned for specific styles of riding.
Understand how waist width, flex and sidecut and stance dimensions effect board performance to find the best board for you.

For reference: drawing of the Flagship 161

Size Chart

Product Size	Weight Range (lbs/kg)	Bindings Recommended Size	Weight / Production tolerance +/- 15%	Skins Group	Effective Edge Length	Nose Length (cm)	Tail Length (cm)	Nose Width (cm)	Waist Width (cm)	Tail Width (cm)	Taper	Sidecut (m)	Reference Stance (cm)	Centered Stance (cm)	Setback (cm)
147	130-180 lbs / 59-82 kg	S/M/L	3,0 kg / 6,6 lbs	I	104	38.5	11.5	32.11	27.5	30.12	2	6.75	-	58	2.2
152	140-190 lbs / 64-86 kg	S/M/L	3,2 kg / 7,0 lbs	I	109	38.5	11.5	32.37	27.5	30.35	2	6.95	-	58	2.2
157	150-200 lbs / 67-91 kg	S/M/L	3,2 kg / 7,0 lbs	I	114	38.5	11.5	32.7	27.5	30.7	2	7.1	-	58	2.2

Bolt-less Bridge

The Bolt-less Bridge eliminates split clip attachment hardware from the base of the board by re-profiling the wood core at the clips. The wood core under the clips is thicker providing better torsional stiffness and a more powerful connection at the split clips.

Ultra Clips

Karakoram Ultra clips are the strongest, lowest profile splitboard clips in the world. They deliver unmatched compression between board halves and they are adjustable so you can maintain even compression as your splitboard ages.

Gallery

First prototype

The first template of the Storm Chaser was a thin piece of wood hand drawn and cut by Chris Christenson and Jeremy Jones in Jeremy’s garage. They used Chris’ surf shaping tools to outline the shape and rocker profile. The hand written notes delineate subtle rocker contours and dimensions.

From shaping bay to mountains

Honored to continue a design partnership with renowned San Diego surfboard shaper Chris Christenson. Chris is one of the most diverse surf shapers in the world and makes everything from contest boards to longboards and record breaking big wave guns. Photo – Andrew Miller

High Performance, Sustainably Made Gear
We design gear that balances performance, durability and sustainability. We strive to make equipment you can trust with the most eco-conscious materials possible. New for 2020, all our snowboards and splitboards are molded with Super Sap Bio-Resin.
Proud member of 1% For The Planet, we donate 1% of sales to fight climate change by supporting our non-profit partners Protect Our Winters and Community Carbon Trees.