Mountain Twin Splitboard

The backcountry twin

Ideal for backcountry touring and freestyle

Directional All-Mountain

Shape

Traction Tech

Blunt Nose

Progressive Sidecut

Quick Tension Tail Clip

Directional Twin

Bolt-less Bridge

Flex

Stiffness: 7/10 - Playful

Twin flex pattern

IMG/png/mountain-twin-split-flipflop.png

IMG/png/jones1920-mountaintwinsplit-topsheet.png

IMG/png/jones1920-mountaintwinsplit-nose.png

The Mountain Twin Split offers creative riders a time tested directional twin shape option for getting rad in the backcountry. It’s designed to offer precision control riding regular or switch on any terrain from chutes to tree runs to backcountry booters.

The Mountain Twin Split features blunt tips, a mid-stiff flex and a CamRock profile that offer playful float in pow and critical stability at speed. For added edge grip on icy skin tracks or steep descents, the Mountain Twin Split also features Inner/Outer Traction Tech 2.0 edges plus the Boltless Bridge and Karakoram Ultra Clips which eliminate base hardware and deliver unmatched torsional board response in ride mode. New for 2020, we’ve added Rounded Recycled ABS Sidewalls for improved topsheet durability.

Personality

Camrock

A unique rocker/camber flex pattern defined by evenly balanced tip and tail rocker and camber between the bindings. CAMROCK improves freestyle finesse by keeping your tips playful while maintaining the power and pop of camber underfoot.

Traction Tech

Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.

Traction Tech is a critical feature for rockered boards. Rocker improves glide in mixed conditions, but the decreased edge contact makes it harder to really lock
into your turns and hold a solid edge. Traction Tech is crucial to offset the edge drift of rocker. — Jeremy Jones

Blunt Nose

How a board glides in powder, crust, corn or any snow more than an inch deep, is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight. — Jeremy Jones

Progressive Sidecut

At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Quick Tension Tail Clip

Built-in climbing skin tension system using pre-cut notch that eliminates the need for a traditional skin tail clip.

Directional Twin

Flip Flop Base

Producing two or more base color options minimizes p-tex waste. Order may be filled with either color. Color does not vary by size.

Sintered 7000

Durable natural base material with added carbon for speed and good wax absorbency.

Wend Natural Wax

Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Triax Fiberglass

Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any terrain or snow conditions.

Factory Tuned

All Jones Snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Oversized Recycled Edges

All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.

Karakoram Ultra Clip

ULTRA clips are the strongest, lowest profile splitboard clips in the world. They deliver unmatched compression between board halves and they are adjustable so you can maintain even compression as your splitboard ages.

Stainless Steel Reinforcement

Stainless steel plates are embedded into the nose and tail for improved board tip durability.

The Bridge Tech

The Bolt-less Bridge eliminates split clip attachment hardware from the base of the board by re-profiling the wood core at the clips. The wood core under the clips is thicker providing better torsional stifness and a more powerful connection at the split clips.

Recycled Rounded ABS

New rounded sidewall finish that improves board durability by protecting top sheet from chipping. Available on all splitboards and Surf Series models.

Eco Plastic Topsheet

Bio-plastic topsheet made from Castor beans. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet)

Super Sap Bio Resin

All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are co-products or waste products of other plant-based industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.

Mountain Core

Dual-density full wood core with hardwood bamboo stringers for added pop and durability.

Gear 101
Twin boards can be ridden shorter than a Directional Freeride board, unless you plan to ride the Twin in deep pow.
For steeps and park riding, size your Twin 2 - 3 cm shorter than your Directional Freeride board.
Choose the ideal size Directional Twin board using your weight and boot size (see the size chart below).

If you wear US Men’s 11.5 or bigger, look for our Big Horn series boards with minimum waist width 26.3 cm.
Not sure your ideal snowboard size? Check out our sizing guidelines for each model.

Know your board
The dimensions of a snowboard define how that board performs on snow. The dimension specs of all our models are fine tuned for specific styles of riding.
Understand how waist width, flex and sidecut and stance dimensions effect board performance to find the best board for you.

For reference: drawing of the Flagship 161

Size Chart

Product Size	Weight Range (lbs/kg)	Bindings Recommended Size	Weight / Production tolerance +/- 15%	Skins Group	Effective Edge Length	Nose Length (cm)	Tail Length (cm)	Nose Width (cm)	Waist Width (cm)	Tail Width (cm)	Taper	Sidecut (m)	Reference Stance (cm)	Centered Stance (cm)	Setback (cm)
157	130-180 lbs / 59-82 kg	M/L	3,0 kg / 6,6 lbs	D	117	21	21	29.42	25.3	29.42	0	7.8	-	58	2
160	150-200 lbs / 67-91 kg	M/L	3,2 kg / 7,0 lbs	D	119.4	21.3	21.3	29.8	25.6	29.8	0	8	-	58	2
161w	150-200 lbs / 67-91 kg	M/L	3,2 kg / 7,0 lbs	D	120.6	21.2	21.2	30.18	26	30.18	0	8.2	-	58	2

Bolt-less Bridge

The Bolt-less Bridge eliminates split clip attachment hardware from the base of the board by re-profiling the wood core at the clips. The wood core under the clips is thicker providing better torsional stiffness and a more powerful connection at the split clips.

Std Clips

Jones Splitboards feature premium Karakoram K-clips plus tip and tail hooks. Adjustable tension K-clips increase board torsional stiffness and offer a superior connection to simple interlocking clips.

High Performance, Sustainably Made Gear
We design gear that balances performance, durability and sustainability. We strive to make equipment you can trust with the most eco-conscious materials possible. New for 2020, all our snowboards and splitboards are molded with Super Sap Bio-Resin.
Proud member of 1% For The Planet, we donate 1% of sales to fight climate change by supporting our non-profit partners Protect Our Winters and Community Carbon Trees.